What Are The Benefits Of Onsite Cable Termination?
As you start to plan your new cabling network, you'll have to decide how to terminate your cables. While you can buy individual cables that are pre-terminated by their manufacturer, you can also buy cabling in bulk. You then cut cables to size and add termination connectors as you work.
Why should you consider onsite termination?
Get a Faster Start
If you buy pre-terminated cables, then you have to plan out your job more precisely. You need to know the exact length of each cable in each part of your network so that you can order the right sizes. This adds to your planning time.
Plus, if you need non-standard sizes, then you may have to order custom cables in advance. You'll have to wait for them to be put together and shipped to you. This might delay your project's start time.
If you use cable rolls and add your own terminators and connectors, then you can start work faster. You only need a general estimate of the cabling you need. Unterminated cabling rolls are easy to source off-the-shelf. If you run out during the job, you can simply buy more.
Make Your Installation Easier
Pre-terminated cables aren't always easy to install. You aren't working with just cables here; you also have to deal with the connectors at either end of each piece. These connectors can be more fragile than the cabling itself. So you have to take extra care when you pull cables through their channels.
This can be a real problem when you're working underground, or behind walls or ceilings. If you can't see the cable to guide it, then its terminated ends could get damaged even if you are extra careful. For example, a connector might catch on an unseen obstruction. Or it could hit the side of the channel hard enough to do some damage. In either case, you could lose some terminators and connectors along the way.
If you use unterminated cabling, then you have an easier job. You simply pull the cables through their channels and then attach terminators and connectors at the other end.
Reduce Your Cabling Costs
Pre-terminated cables cost more than unterminated cabling. You pay to have cabling cut to size and terminated. If you make a sizing mistake, and a cable doesn't fit, then you'll have to buy a new one. If you terminate onsite, then you should see cost savings. Rolls of cabling are cheaper, and you can cut cables from the roll to the exact size you need. You'll have fewer wastage costs.
Contact cabling services near you to learn more.
Share